1 x BRAND NEW Marshall Celestion G12 Vintage 8 Ohms speaker.

INTERNATIONAL DELIVERY:
Very sorry but for international customers we can only ship this item through our ebay store using their Global Shipping Program (GSP) which takes care of all shipping, import taxes and paperwork so there’s no mess ups.
Click here to view this item in our ebay store:
https://www.ebay.co.uk/itm/303196664884

Quantity of 1 !
This a 100% brand new item.
Supplied to us in bulk from Marshall.
Made in UK with “444” code stamped on back of cone.
Marshall part number SPKR-00047
Can be used in a variety of amplifier combo’s and speaker cabinets.

CONDITION NOTE: we buy these speakers direct from Marshall and they are BRAND NEW however there may be slight signs of scuffing around the mounting holes. I can only assume this is where Marshall test them or part of the manufacting process. There is no signs of use / indentations on the foam rubber around the edge of the speaker like you get from a used one.

VERY IMPORTANT – Please ensure you make note of the “Ohms” of your speaker or amp specification – it is not adviseable to use this speaker if replacing it for a 16 Ohm speaker or a 4 Ohm one. This is an 8 Ohm speaker and should only be used to replace a similar 8 Ohm speaker.

Of course there are several exceptions and instances where you can swap a 16 Ohm for an 8 Ohm but I just wanted to make sure you check before you replace it out to avoid potential damage.

As we buy in bulk the speaker will be shipped securely in a non specific cardboard box with plenty of packaging.

More info (from Celestion):
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ‘hot-rodded’ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ‘H’ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.

Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand- wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton

General Specifications
Nominal diameter
12″, 305mm
Power rating
75Wrms
Nominal impedance
Available 8Ω or 16Ω
Sensitivity
100dB
Chassis type
Pressed steel
Voice coil diameter
1.75″, 44.5mm
Voice coil material
Round copper
Magnet type
Ceramic
Magnet weight
50oz, 1.42kg
Frequency range
70-5000Hz
Resonance frequency, Fs
75Hz
DC resistance, Re
Available 7.3Ω or 12.9Ω
Mounting Information
Cut-out diameter
11.1″, 283mm
Diameter
12.2″, 309mm
Magnet structure diameter
6.1″, 156mm
Mounting slot dimensions
0.31″, 7.9mm Ø
Mounting slot PCD
11.7″, 297mm
Number of mounting slots
4
Overall depth
5.3″, 135mm
Unit weight
10.4lb, 4.7kg