Open: Monday to Saturday 9.30am to 5pm Tel: 01202 718886
Return to previous page

BRAND NEW Marshall Celestion Vintage 16 Ohms speaker.

An ideal upgrade and direct replacement for your DSL40C speaker.

Very sorry but for international customers we can only ship this item through our ebay store using their Global Shipping Program (GSP) which takes care of all shipping, import taxes and paperwork so there’s no mess ups.
Click here to view this item in our ebay store:

This a 100% brand new item.
Supplied to us in bulk from Marshall.
Can be used in a variety of amplier combo’s and speaker cabinets.

VERY IMPORTANT – Please ensure you make note of the “Ohms” of your speaker or amp specification – it is not adviseable to use this speaker if replacing it for a 8 Ohm speaker or a 4 Ohm one. This is an 16 Ohm speaker and should only be used to replace a similar 16 Ohm speaker.

Of course there are several exceptions and instances where you can swap a 16 Ohm for an 8 Ohm but I just wanted to make sure you check before you replace it out to avoid potential damage.

As we buy in bulk the speaker will be shipped securely in a non specific cardboard box with plenty of packaging.

More info (from Celestion):
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ‘hot-rodded’ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ‘H’ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.

Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand- wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton

General Specifications

Nominal diameter
12″, 305mm
Power rating
Nominal impedance
Available 8Ω or 16Ω
Chassis type
Pressed steel
Voice coil diameter
1.75″, 44.5mm
Voice coil material
Round copper
Magnet type
Magnet weight
50oz, 1.42kg
Frequency range
Resonance frequency, Fs
DC resistance, Re
Available 7.3Ω or 12.9Ω

Mounting Information

Cut-out diameter
11.1″, 283mm
12.2″, 309mm
Magnet structure diameter
6.1″, 156mm
Mounting slot dimensions
0.31″, 7.9mm Ø
Mounting slot PCD
11.7″, 297mm
Number of mounting slots
Overall depth
5.3″, 135mm
Unit weight
10.4lb, 4.7kg

Shipping Weight 10 kg
Dimensions 40 × 40 × 30 cm
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields