Bourns 500K Long Shaft TONE pot

What we have here is… ONE single 500K TONE pot complete with two nuts and two flat washers. This is a good quality BOURNES item with a light rotary action and smooth operation. Suitable for many types of solid body guitars such as Epiphone, Gibson etc. Remember there are MANY types of Electric guitar (new and old) so I cannot guarantee this will fit ALL electric guitars or your SPECIFIC guitar so please check and measure the size before ordering to save confusion and inconvenience.

These are the 24mm LARGE body style QUALITY pots not the smaller body (cheaper / Guitar Tech) versions and features a BRASS threaded area. It has the 19mm long thread to go through the maple top of a Les Paul type guitar.
The hole required in the body of the guitar need to be just over 9mm in diameter. Take note of this measurement as certain models of guitar may require some filing to make that hole slightly bigger for the pot to fit through.

The TOP of this pot has a slot and a knurled edge. Your volume knob will then simply push over rather than screw on.

500k pots are GENERALLY fitted to guitars that have HUMBUCKER pickups making this pot suitable for many many guitars. Guitars with a mixture of humbuckers and singles will also typically use a 500k but Fender / Squier Strats and Tele’s and other single coil only guitars will most likely use 250K.

Specificaton:

Track Resistance: 500kohm
Power Rating: 250mW
Resistance Tolerance: ± 20%
Product Range: PDB241 Series
No. of Turns: 1Turns
Track Taper: Linear (Tone)
Pot Mounting: Panel
Shaft Diameter: 6mm
No. of Gangs: 1
Adjustment Type: Screwdriver Slot
Shaft Length: 19mm
SVHC: No SVHC (20-Jun-2016)